DESCRIPTION
The JaourMelt ® is a synthetic rubber based hot melt adhesive
specifically developed to be applied at low temperature for
construction applications for nonwoven disposables, including the
absorbent core fixation. It is light color and low odor. It
features high bond strength and tack, and long open time for good
machining and provides good penetration and wettability to various
substrates.
SUGGESTED USES
Low temperature adhesive for constructions includes the absorbent
core fixation for nonwoven disposable applications
TYPICAL PROPERTIES
| Appearance | Water White transparent solid |
| Color (Gardner) | ≤ G3 |
| Softening Point (R&B) | approx. 75°C |
| Viscosity (Brookfield) | |
| @110 °C | 6,650 cps |
| @120 °C | 3, 425cps |
| @130 °C | 1,935 cps |
| @140 °C | 1, 355 cps |
OPERATING GUIDES
The material can be applied by all types of spray and slot
applicators. Suggested operation temperature is 120 – 140 ° C for
spray and 110 – 130 0°C for slot, depending on machines,
substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation
of 21 CFR 175.105, “Adhesives”.
PACKAGE
1kg sausage wrapped with meltable film, 25kg/box.
Please consult the sales representative for further information.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months,
from the date of manufacture, in its original packages under dry
and clean conditions at ambient temperature below 35 0 C and above
5 ° C. Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The
material is applied hot. Appropriate personal protective clothing
and eye protection are strongly recommended to prevent burns.
Adequate ventilation is suggested to remove any vapors or fumes
generated.Rotate stocks and using the oldest stock first.
